- Overview
- Company Profile
Basic Info.
Packaging & Delivery
Product Description
The EAS Series AC isolation switches are suitable for switching on and off AC circuit systems, such as in PV systems and air conditioning systems. This weatherproof disconnector is particularly suited for outdoor installation and can achieve IP66 protection level. The base mounted mechanism provides more convenient termination and wiring room.
EAS5 isolator is rigidly built to withstand more than just the vagaries of the water,it is designed also for frequent switching even on severe load such as switching of motor loads or other highly inductive load. Suitable to be mounted in outdoor and indoor for diverse environment.
The EAS5 Series of weather protected isolating switch is a robust range of switch suitable for virtually any external application. Included in the range is single,double and triple pole switches from 20 to 63A.
EAS5 series of weather-resistant isolator wide range of applications, suitable for any outdoor application conditions. Including unipolar, bipolar, and three-pole switch, current use of 20A ~ 63A.
Installed base of devices provides a more easy termination and more wiring space. (Switch size is 165mm × 82mm, overall height 85mm.)
Install ground and neutral bars with dual clamping screws to connect the same cable clamp strip length and reliable. Terminal aperture 5-6mm.
More secure, installation switches to a metal structure with an insulating cap, insulating cap covering the base mounting screws to prevent their exposure to energized cables.
Each unit supplied with screwed conduit plugs and screwed reducers for easy connection to 25mm or 20mm conduits and screw caps. Screw caps must be installed to ensure IP Rating.
The impact Resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with aone piece weather seal gasket.
For security,a 7mm diameter hole is provided for padlocking the lever in the OFF position. Deep moulded barriers protect the operating lever from physical abuse or accidental switching.
All units comply to IEC60947-3.
Standard colours are Grey.
Product Benefits
- Switching ON &OFF on-load
- 4pcs screws with protective caps for high strength locking
- IP66 & UV resistance and flame-retardant material
- Dual 25mm threaded conduit entries on top and bottom
- Pad-lockable handle
- 5 years warranty, product insurance, and recall insurance available
Technical Data
| Type designation | EAS5EL/20 | EAS5EL/35 | EAS5EL/63 | ||
| Ambient temperature | -5°C ~+40°C | ||||
| Interrupting medium | Air | ||||
| Utilization category | AC-22A | ||||
| Number of poles | 1P(x=1), 2P(x=2) | 1P(y=1), 2P(y=2), 3P(y=3) , 4P(y=4) | |||
| Rated operational voltage / current | N: AC250(1P),AC440V(2P/3P/4P) | ||||
| Rated frequency | 20A | 35A | 63A | ||
| Rated Insulation voltage | (Ie) | 50/60Hz | |||
| Conventional free air thermal current | 500 V | ||||
| Conventional enclosed thermal current | (Ui) | // | |||
| Rated short-time withstand current | (Ith) | 20A | 35A | 63A | |
| Rated short-time making capacity | (Ithe) | 0,76kA, 1s | |||
| Rated conditional short-circuit current | (Icw) | 1,5kA | |||
| Short circuit protective device | (Icm) | // | |||
| Rated Impulse withstand voltage | (Icn) | 4,0 kV | |||
| Overvoltage category | II | ||||
| IP code | (Uimp) | IP66 | |||
| Pollution degree | 3 | ||||
| Suitability for isolation | Yes | ||||
| Type designation | EAS50EL |
| Number of poles | 1P, 2P |
| Terminal designation, main circuit | 1, 2 ; 1, 2, 3, 4 ; 1, 2, 3, 4, 5, 6 ; 1, 2, 3, 4, 5, 6, 7, 8 |
| Type of terminal, main circuit | Screw terminal |
| Rated cross sectional area, main circuit | 2,5-25mm2 |
| Type of conductor | Flexible or rigid |
| Number of conductors per terminal | 1 |
| Required preparation of the conductor | No |
| Stripping length (mm), main circuit | - |
| Tightening torque, main circuit (Nm) | 2,5Nm (M6) |
FAQ Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.
Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.
Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.
Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.
Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.
Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.
Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.
Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?
A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.